如果 您是大蝦  麻煩您了  幫小妹翻譯一下
        SMR  mainternance  
  
    since the SMRs are fully controlled  by the Minicsu there is no need for any adjustments to parameter    Howere   some regular checks  can be an early warning of problems warning  to happen
          8.1 current  Sharing
     under normai conditions  the currents contributed by every rectifer should be within+2amps(-2amps)of each other It is possible however  for internal loop parameters to change to such an extent that a unit dose not share to the extent that it should .
     if the lack of sharing is extreme then either a current limit or no load alarm will be active and the operator should then refer to the next section  
     if ,however , the current sharing is not so extreme as to generate an alarm ,a regular check of the current sharing among the rectifiers can lead to early detection of any units which may be developing a fault.