AFE Init Retry Limit 翻譯為AFE 初始化重置限制。

After a full reset the AFE offset and gain values are read twice and then compared. AFE Init Retry Limit
is the maximum number of times that the initial AFE offset and gain values will be read, if they are not
considered the same, until the [AFE_C] permanent failure occurs.

個人直譯為初始的AFE的偏移值和增益值被讀取的最大次數(shù)，如果二者不相同，直到[AFE_C]永久性故障發(fā)生   default value 6

不甚理解 

AFE Init Limit翻譯為AFE 初始化極限

AFE Init Limit is the difference in A/D counts that two successive readings of AFE offset and gain can be
and still considered the be same value, after a full reset.

個人直譯：AFE 初始化極限是在充分復位后兩次連續(xù)讀取AFE偏移值和增益值的差別范圍，在這個范圍內(nèi)仍然被認為是相同。

default value  20

對AFE Init Retry Limit的理解困難，求高手指導