APL5610/A是茂達電子(ANPEC Electronics Corporation) 所推出的低壓差穩壓控制IC，工作時外部需要搭配一顆N-Channel MOSFET做為傳送組件，IC輸入電壓操作范圍在4.5~13.5V，內部提供0.8V參考電壓搭配外部負回授分壓電阻可讓使用者自由設定輸出電壓。穩壓器的輸出電流則由外部N-Channel MOSFET來決定，能有非常高的輸出電流能力，并且能有極低的壓差電壓(dropout voltage)。APL5610/A適用于主機板、筆記型計算機等。

APL5610/A具有低壓保護功能，能提供短路或過載時的保護，而EN接腳可使IC進入關閉模式以減少功率的消耗，更具備一POK腳位用來指示輸出電壓狀態。APL5610/A采用小型SOT-23-6封裝，工作溫度范圍在-40℃至+85℃之間。

詳細產品規格請瀏覽茂達電子網站:https://www.anpec.com.tw/

APL5610/A : Low Dropout Linear Regulator Controller

The APL5610/A is a low dropout linear regulator controller. The APL5610/A could drive an external N-Channel MOSFET and provides an adjustable output by using an external resistive divider.

The APL5610/A integrates various functions. For example, a Power-On-Reset (POR) circuit monitors VCC supply voltage to prevent wrong operations; the function of Under-Voltage Protection (UVP) protects the device from short circuit condition. A POK indicates that the output status with time delay which is set internally. It can control other converter for power sequence. Moreover, the APL5610/A can be enabled by other power system; namely, holding the EN above 1.6V enables output and pulling the EN under 0.4 disables output.

The APL5610/A is available in SOT-23-6 package.