逆變器做CE(或E-mark)、UL認證的問題 (求助)
逆變器:12VDC輸入,120VAC或230VAC單路輸出
問題:
1、車載逆變壓器去歐洲做E-mark的協調標準是哪幾個?
(例:IT類Adaptor做CE,協調標準為EN 60950-1,EN 61000-3-2,EN 61000-3-3,EN 55022, EN 55024)
2、非車載逆變器去歐洲是做CE嗎?協調標準是哪幾個?
3、車載逆變器去美國需要做FCC嗎?FCC的范圍?(有FCC官方文件說明更好)
4、非車載逆變器申請UL是用哪一個標準?
請各位兄弟幫忙解答.(知道一點就說一點哦)
謝謝....
逆變器做CE(或E-mark)、UL認證的問題 (求助)
全部回復(19)
正序查看
倒序查看
@xiupingwu
認證實驗室UL/GS含有預測試
做E-MARK也用這個標準,奇怪了,E-MARK是按照ECE/UN協調標準進行測試的,但是協調標準中好像沒有對于該類產品的專門標準,一般都通用采用ECE010即電磁兼容進行測試,不知道說的對不對,呵呵.
0
回復
@duqingang
做E-MARK也用這個標準,奇怪了,E-MARK是按照ECE/UN協調標準進行測試的,但是協調標準中好像沒有對于該類產品的專門標準,一般都通用采用ECE010即電磁兼容進行測試,不知道說的對不對,呵呵.
是的.
According the Automotive directive this product is classified as not-safety related (no safety impact on vehicle and driver).
Service:
- EMC testing according 2004/104/EC required for e-marking
- EMC test report
- e-4 certification
According the Automotive directive this product is classified as not-safety related (no safety impact on vehicle and driver).
Service:
- EMC testing according 2004/104/EC required for e-marking
- EMC test report
- e-4 certification
0
回復
